GHC™ 10
Marine Autopilot Control Unit

The GHC 10 is the dedicated control unit for the GHP 10, the autopilot system for power boat users who want auto-guided navigation.

Handle your Boat with Convenience and Safety
The simple, interactive interface of the GHC 10 gives boaters the confidence and security of controlling the heading of the boat at the press of a key. For example, each press of the steering soft key will change the commanded heading of the autopilot by 1°. And as a safeguard, a dedicated "Standby" key allows you to instantly place the autopilot in standby to keep it from re-engaging.

Connect to other Marine Units
The GHC 10 communicates with the GHP 10 autopilot system via a NMEA 2000 bus, so autopilot heading data can easily be shared with other devices.  3 GHC 10 controllers can be interfaced with a single GHP10,  allowing for autopilot capabilities in multiple stations on your boat.

The GHC 10 also has the capability of communicating to a chartplotter for GPS-enabled route guidance over NMEA 2000 or NMEA 0183.

Specifications

 Unit dimensions, WxHxD: 4.3 " x 4.4 " x 1.9 " (10.9 x 11.2 x 4.8 cm)

Display resolution, WxH: 320 x 240 pixels

Display type: QVGA color LCD displa 

NMEA output: NMEA 0183 (GHC 10), NMEA 2000 (GHP 10 & GHC 10)

Supply voltage:

• GHP 10: 10V to 20V
• GHC 10: 7V to 32V

Operating temperature: -15° C to 70 C° (5° F to 158° F)